Senior Equipment Engineer - Diffusion
GlobalFoundries · USA - New York - Malta
Posted Nov 3, 2026 · first seen by JobShifu Nov 3, 2026
Analyze my fitApply on GlobalFoundries
Free · scored from your resume. Fit, company intel and referrals need a free account.
At a glance
- Pay $69k–$120k
- Location USA - New York - Malta
- Role type Onsite · Full time
- Posted Nov 3, 2026
- Min experience 2+ yrs
- Seniority senior
- Degree bachelors
Job description
About GlobalFoundries
GlobalFoundries is a leading full-service semiconductor foundry providing a unique combination of design, development, and fabrication services to some of the world’s most inspired technology companies. With a global manufacturing footprint spanning three continents, GlobalFoundries makes possible the technologies and systems that transform industries and give customers the power to shape their markets.
For more information, visit www.gf.com.
Summary of Role: Senior Equipment Engineers maintain and support equipment readiness. Typically performs one or more of the following in capacity of an individual contributor: Perform preventive maintenance (PM) and troubleshooting of equipment.
Execute maintenance and tool support ensuring equipment readiness. Troubleshoot and upgrade of equipment ensuring minimal downtime. Analyze and monitor technical charts. Drive equipment improvement plans and projects. Ensure and follow good safety practices and custody of tools, equipment and other properties.
Perform all activities in a safe and responsible manner and support all Environmental, Health, Safety & Security requirements. Work and collaborate other projects and/or assignments as needed
Essential Responsibilities
- Equipment ownership includes responsibility for hardware performance for a fleet of furnace equipment.
- Responsible for maintenance strategies of equipment including preventative and corrective maintenance.
- To generate and optimize maintenance work instructions and to ensure effective maintenance of equipment with a team of shift technicians.
- Interface with supplier service team on site to ensure effective operation and maintenance.
- Continuous improvement of equipment reliability, efficiency, and quality.
- To ensure cost minimization by efficient utilization of resources including parts management/2nd sourcing and performance optimization.
- Start-up of new equipment until “ready for process” including hookup/facilitation, hardware installation, process startup, and acceptance.
- To ensure appropriate maintenance documentation is updated, and Fault Detection Control is used for Equipment.
- Strong troubleshooting skills and experience with corrective maintenance across multiple equipment types.
Other Responsibilities
• Perform all activities in a safe and responsible manner and support all Environmental, Health, Safety & Security requirements and programs.
Required Qualifications
- Education and Experience: BS degree + 2-4 years of experience. Experience includes multiple years work in any of the following engineering fields: Electrical Engineering, Electronics, Mechanical Engineering, Mechatronics, Microelectronics or equivalent.
- Familiar with maintenance methods and/or equipment engineering.
- Ability to work in cross-functional teams of equipment and process engineers and with suppliers service management.
- Comprehensive project management skills.
- Strong communication and collaboration ability across teams and shifts.
- Excellent documentation skills.
- Ability to execute tasks in a Clean Room environment.
- Applicant must be a US Citizen
- Must be eligible to obtain and maintain a SECRET level U.S. Government security clearance
Preferred Qualifications
- Experience in a high-volume semiconductor fab environment.
- Advanced knowledge of equipment reliability and performance optimization techniques.
- Demonstrated success in leading CIP projects and equipment improvement initiatives.
- Strong Critical thinker with a quality first mindset and the ability to influence peers.
- Demonstrated success driving continuous improvement.
- Training and mentoring experience within technical teams.
- Experience managing parts requests and vendor coordination for equipment support.
Compensation
Expected Salary Range
$69,000.00 - $120,000.00
The exact Salary will be determined based on qualifications, experience and location.
The role you are applying for may require you to obtain a US Department of Defense Security Clearance at some time during your employment. Acceptance of this role commits to applying for such if requested. Further, the applicant consents to being asked questions about their citizenship and background to assess the likelihood of obtaining a Security Clearance.
The applicant also acknowledges that GlobalFoundries can only nominate and submit an application for a Security Clearance. The granting of a Security Clearance is at the sole discretion of the U.S. Government and the Department of Defense.
If you need a reasonable accommodation for any part of the employment process, please contact us by email at usaccommodations@gf.com and let us know the nature of your request and your contact information. Requests for accommodation will be considered on a case-by-case basis.
Please note that only inquiries concerning a request for reasonable accommodation will be responded to from this email address.
An offer with GlobalFoundries is conditioned upon the successful completion of pre-employment conditions, as applicable, and subject to applicable laws and regulations.
GlobalFoundries is fully committed to equal opportunity in the workplace and believes that cultural diversity within the company enhances its business potential. GlobalFoundries goal of excellence in business necessitates the attraction and retention of highly qualified people.
Artificial barriers and stereotypic biases detract from this objective and may be illegally discriminatory.
All policies and processes which pertain to employees including recruitment, selection, training, utilization, promotion, compensation, benefits, extracurricular programs, and termination are created and implemented without regard to age, ethnicity, ancestry, color, marital status, medical condition, mental or physical disability, national origin, race, religion, political and/or third-party affiliation, sex, sexual orientation, gender identity or expression, veteran status, or any other characteristic or category specified by local, state or federal law
Requirements · 32
- Perform preventive maintenance (PM) and troubleshooting of equipment Must-have
- Execute maintenance and tool support to ensure equipment readiness Must-have
- Troubleshoot and upgrade equipment to minimize downtime Must-have
- Analyze and monitor technical charts Must-have
- Drive equipment improvement plans and projects Must-have
- Follow safety practices and maintain custody of tools and equipment Must-have
- Support Environmental, Health, Safety & Security (EHS) requirements Must-have
- Manage hardware performance for a fleet of furnace equipment Must-have
- Develop maintenance strategies including preventative and corrective maintenance Must-have
- Generate and optimize maintenance work instructions Must-have
- Interface with on-site supplier service teams Must-have
- Drive continuous improvement of equipment reliability, efficiency, and quality Must-have
- Minimize costs through efficient resource utilization and parts management Must-have
- Manage new equipment start-up including installation, hookup, and acceptance Must-have
- Maintain updated maintenance documentation and use Fault Detection Control Must-have
- Perform corrective maintenance across multiple equipment types Must-have
- BS degree and 2-4 years of experience in Electrical Engineering, Electronics, Mechanical Engineering, Mechatronics, or Microelectronics Must-have
- Familiarity with maintenance methods and equipment engineering Must-have
- Work in cross-functional teams with equipment/process engineers and supplier management Must-have
- Comprehensive project management skills Must-have
- Collaborate across teams and shifts Must-have
- Maintain excellent documentation Must-have
- Execute tasks in a Clean Room environment Must-have
- US Citizenship Must-have
- Eligible to obtain and maintain a SECRET level U.S. Government security clearance Must-have
7 nice-to-haves, and which of the 32 you cover, after you upload a resume.
Domain experience · 3
- Semiconductors
- Equipment Engineering
- Maintenance
Keywords · 15
- Preventive Maintenance
- Troubleshooting
- Maintenance
- Tool Support
- Equipment Upgrade
- Technical Analysis
- Project Management
- Safety Compliance
- EHS
- Furnace Equipment
- Preventative Maintenance
- Corrective Maintenance
- Work Instructions
- Supplier Management
- Continuous Improvement
About GlobalFoundries
GlobalFoundries operates as a leading semiconductor foundry, manufacturing feature-rich microchips designed by other technology companies. The company generates revenue by fabricating silicon wafers for diverse applications in automotive, communications, and industrial markets.
- Public company
- 10,001+
- Malta, New York, United States
- Founded 2009
297 open roles now, 434 opened in the last 30 days.
Strengths · 3
- Strategic global footprint
2 more strengths and 3 risks are for members.
Signals from public sources, not verified facts.
Visa sponsorship
470 H-1B petitions approved FY2021-2026 (USCIS). Past petitions under this employer name, not a promise this role sponsors.